Common sizes for the home and office include: 26/6, 24/6, 24/8, 13/6, 13/8 and No. 10 for mini staplers. Common sizes for heavy duty staplers include: 23/8, 23/12, 23/15, 23/20, 23/24, 13/10, and 13/14. How do I know what size staples to get? Most staples have two reference numbers that are normally standard throughout the brands.
You could be wondering “What size do staplers come in?”
One article argued that ensure you purchase the correct leg length as standard staplers are only designed to hold 1/4 inch legs. When you see the size of a staple in millimeters or inches, it’s referring to the length of the staple’s legs. The width of a staple, sometimes called its crown, is the top or crossbar of a staple.
How do you read Staples sizes?
Most manufacturers imprint the staple size that the product accepts on the bottom. The size is usually expressed in the metric, two-number form, such as “23/8.” This means that the gauge or thickness of the staple is 23 (the higher the number, the thinner the staple) and the length of the shanks is 8 mm.
When you see the size of a staple in millimeters or inches, it’s referring to the length of the staple’s legs. The width of a staple, sometimes called its crown, is the top or crossbar of a staple. It’s the part of the staple you will see flat across the top of whatever you bind.
What size staple do I need for paper?
If you need to staple a thick pile of paper at once, you’ll need a staple with long legs. Ensure you purchase the correct leg length as standard staplers are only designed to hold 1/4 inch legs. When you see the size of a staple in millimeters or inches, it’s referring to the length of the staple’s legs.
For example, according to the table, 7/16″ OSB (Oriented Strand Board) wall sheathing may be fastened with 6d common, box or casing nails OR 1-3/4″ 16 gage staples at 6″ on center at the panel edges and 12″ on center in the field (special conditions apply for shear walls).
What size staples should you use for roofing?
Similarly, 19/32″ OSB roof sheathing would be 8d common, box or casing nails at 6″ on center at the panel edges and 12″ on center in the field OR 2″ 16 gage staples at 4″ on center at the panel edges and 8″ on center in the field. Note the differences in the specification and length of the fasteners as well as the nail/staple patterns.
According to shingle manufacturer Staple Leg Length (in. Recommended Minimum Stapling Schedule for Plywood: All values are for 16 gauge galvanized wire staples having a minimum crown width of 3/8″.
What kind of stapler do you use for roofing?
Roofing staple guns have been sold for nearly 40 years and in some models including the one I liked, are still available, such as the Stanley Bostitch 16-Gauge Wide Crown Roofing Staple Gun, shown here. This stapler might also be used for securing house-wrap and other building materials .
This of course begs the question “How do you use a roofing staple gun?”
One way to consider this is a roofing staple gun must be fired with the gun tip parallel to and flush on the shingle surface , otherwise one end of the shingle is left sticking up, ready to puncture the overlying tab of the next course either from being heated in the sun or from your heavy-footed laborer who steps on it right before he slams down another bundle of shingles.
Can staples be used for roofing?
Many reviews done over the years by reputable entities have depicted that many manufacturers and building codes do not approve the use of staples on roof shingles. They do not recommend them for roofing on residential housing and they exclusively state that roofing nails are more fitting especially in areas with very adverse weather conditions.
Staples can be used for tacking it down , but not recommended to hold. When the shingles are installed the felt is not going anywhere. Back in the day all I used was staples and /or roofing nails now plastic tops are the norm. Can you tell me what a felt nail looks like?, and (plastic top?).
Although staples are allowed in some jurisdictions, they do not provide the same holding power. Both nails and staples should be long enough to penetrate the roof sheathing by 3/4 inch or penetrate 1/4 inch through the sheathing if it is less than 3/4 inch thick.
Another inquiry we ran across in our research was “Can staple be used on roof shingles?”.
Different options can be used to fasten shingles to ensure that the roof can resist any potential wind uplift. The lingering question is whether the crown of a staple can be used as the fastener to hold the shingle in place. This article discusses this to establish whether staples can indeed be used on roof shingles.