A yellow light on your Verizon Fios router indicates that it is not connected to the internet . To reconnect, you need to perform a soft reboot. Press and hold the reset button on the back of your router for 3 seconds.
Then about 10 seconds go by and the router goes to solid white and the extending goes to solid yellow . After that, the extender goes to fast blinking yellow in about 15 seconds and stays that way. The first time I let it do that for 15 minutes and plugged it back in and got solid yellow, followed by fast blinking yellow.
How do I Return my Verizon router?
[Directions: switch the ethernet cable to your new router, unplug the ONT, wait a bit, then plug it and your new router in. Confirm it works.] Step 2: Go onto Verizon. Co m to create a Return Kit .
What to do with old verizon router?
If you have an old router collecting dust , consider using it to create a guest network for visitors or to create a wireless bridge for connected devices. You can also coopt an old router for use as a specific network for Internet-enabled smart devices and home appliances.
Can I keep my old Verizon router?
Q. Verizon says I can only keep my old , discontinued router if I pay a new, $2.80/month fee, or I can buy a new router from them. Do I have any alternatives? Fios subscribers around the country who got their routers for free from the New York firm years ago may be getting an “Important Service Information about your Fios Account” e-mail.
In the case of switching your ISP, you’ll often be asked to return the older device. But if you have an old router kicking around the place, here are several ways you can reuse it . It might be in a box; it could be cluttering up a drawer or lost at the back of a wardrobe.
Those older units max out at the “802.11g” flavor of Wi. Fi’s 54 megabits-per-second speed limit, barely above Fios’s 50 Mbps entry-level speed . That Verizon post also warns that some of those older routers only support “WEP” encryption, an obsolete way to control access to a wireless network that now provides no security.
How do I fix the white light on my router extender?
You then unplug the extender and you should get the solid white light when you plug the extender again. You should initially plug the extender in again closer to the router to make sure you are not too far away . I noticed that the dropped white light to a blinking yellow light is happening much less after about a week.
One article argued that you should initially plug the extender in again closer to the router to make sure you are not too far away. I noticed that the dropped white light to a blinking yellow light is happening much less after about a week . I am not sure why but I think it might be related to the self-organizing network getting better with time.
How do I know if my router is wired?
I am wired using an Ethernet if that means anything . I plug in the extender and get a solid yellow after it boots up. I press both the extender and router for 3-5 seconds and get both blinking blue. After a few seconds they both go solid blue. Then about 10 seconds go by and the router goes to solid white and the extending goes to solid yellow.