Factory Reset the Xfinity Voice Remote without a Setup Button (XR15) If the buttons on your Voice Remote (XR15) are still unresponsive, you may need to perform a factory reset . To perform a factory reset: Press and hold the A (triangle) and D (diamond) buttons at the same time for three seconds until the status light changes from red to green.
Because your remote is not properly synced, you may be unable to change channels. The simple solution is to reconnect your Xfinity remote to the receiver box on your TV. To resync or connect your Xfinity remote, follow these steps: Your remote’s batteries should be fully chargedand ready to use. Check that both your TV and TV Box are turned on.
You may be wondering “Why won’t my TV remote change channels?”
My chosen answer was if you are trying trying to change the channel on your television, but the TV remote won’t change channels, this is the article for you. Below is a list of common problems that will cause your TV remote to not work, and how to fix them. The most likely problem with your remote is that the batteries have died.
How to fix Xfinity XR 15 remote not working?
If you are using an Xfinity XR 15 remote, you should follow the steps below to fix Xfinity remote not working . Hold “ i ” and “ Xfinity ” buttons simultaneously. Now, you will see a code appearing on the TV screen. You should insert that code through the remote. Wait for some time to get a response.
The LED will blink green twice to indicate that the remote was reset . The factory reset unpairs your remote and TV Box, so you’ll need to re-pair them (TV Box needs to be activated prior to re-pairing). See instructions for pairing your Xfinity remote and TV Box.
If the LED flashes red five times on any button press, this is an indication that the batteries are very low and should be replaced. If the buttons are still unresponsive, chat with us for assistance.
How do I FIX MY TV that won’t turn on?
If there are any objects obstructing the path between you and the TV, try moving around them or in front of them and then use the remote. If you are far from the TV, try moving closer. You can also try wiping down the “eye” on the front of your remote, as built up dust can be blocking the path as well.