Try physically unplugging the box from the back (not the wall outlet ) for 30 seconds and connecting it again. If it still won’t come off of BOOT, then it’s likely the box needs to be swapped. If you don’t want to wait for a technician, you can always take it to the nearest service center or Xfinity store.
When troubleshooting an issue with your Xfinity X1 TV Box, you may be directed to restart the device or you may resolve it online with a system refresh.
Another frequently asked inquiry is “Why is my Xfinity set top box stuck on Welcome Bienvenido?”.
Let us dig in. x1 box stuck on “Welcome. Bienvenue.” No signal cable It seems to be a common issue with Xfinity Set top boxes. Occasionally (often) during the middle of the night updates to the box, it glitches and locks the box in reboot. It has happened here twice now in the last two months.
The lights on the box’s display should turn on or say “Boot” as it starts back up. Wait 5-10 minutes while the system restarts before trying to use it again to see if the reboot worked. Why does my Xfinity cable box say boot?
If your Xfinity Stream app keeps freezing, it’s commonly the result of poor internet connection . Ways to combat this include switching devices, closing other apps, securing your TV cables, and updating the Stream app. Ensure you’re using a supported streaming device by consulting the list below.
Why is my xfinity xfi blinking white?
If you have not completed the activation process for a new Xfinity router, this would be indicated by the flashing white light. This simply means that you need to finish setting up the router before you can use it . Your Xfinity router should automatically begin the activation process after you plug it in, turn it on, and connect your computer or other devices to the Xfinity WIFI connection.
The white light can also mean that something is preventing the router from connecting to the internet , and you may need to do a restart to fix it. Problems and Solutions Here are a few common problems and solutions for when you need to know how to fix Xfinity router white light:.
To restart the router, hold down the power button until it turns off or unplug the router from the wall. Once you have powered off the router, you should wait a minute or two before turning the router back on. After the router has fully restarted, check to see if it still displays a flashing white light .
How do I know if my Xfinity router is working?
The two lights, the Power and the Online light must be glowing solid on the Xfinity modem/router. If any of these lights stops working, you router stops working too. This is the site where I share all of the information about home security .
One source stated official Employees are from multiple teams within Xfinity: CARE, Product, Leadership . We ask that you post publicly so people with similar questions may benefit from the conversation. Was your question answered?
How do I check the status of my Xfinity pods?
You will be able to get a lot more information from the Xfinity x. Fi app , as it shows the full status of each of your Pods. During normal operation, there are no status lights on the Pod — nothing flashing or shining to distract or bother you. The status indicator light is hidden on the front, just off-center.
Can a Xfinity technician run drops from the premise?
Xfinity technicians cannot run lines inside customer homes behind walls (wall fishing) or other customer jobs, but they can run drops from the premise to the pole if needed . Have you had anyone out to the premise in the last 6 months by chance?
Why does Comcast have poor signal outside of my home?
Different regular cable channels arrive in your home on different frequencies and what you describe is poor signal and/or high noise on those channels. A technician can verify quality of signal outside of your home at the point it attaches to your home. I am not a Comcast Employee.
Another question we ran across in our research was “What time Does your Comcast signal go out?”.
During the day, all channels are fine and our internet signal is never affected. It starts each day around 5:30p and lasts until around 11p . Comcast Labs always says the signal is good and we’ve checked all of our connections inside and out. We’ve also resatrted all of our boxes to no avail.